You are currently viewing Buying Steel Decks Guide: An Introduction on Steel Deckings and Their Uses

Buying Steel Decks Guide: An Introduction on Steel Deckings and Their Uses

You might have heard of “steel decking” while planning your dream home or just researching activities for your construction project. Decking is a component in residential and industrial construction, so it’s not unusual that it has piqued your interest and now you would like to know how it can be part of your project. If you want to know more about steel decks, then you are on the right page as we are here to introduce steel deckings to you. Read on to know a helpful guide in buying steel decks in the Philippines.

What is Steel Decking?

Also called metal decking, steel decking is a structural panel made of corrugated metal sheeting that’s used as a structural roof deck or composite floor deck. It is used mostly for roofs and floors as support for the roofs’ insulating membrane or as a structure to allow floors to bond with concrete, increasing their strength. These decks are supported by joints and beams which can also be made of metal. They come in various thicknesses and shapes, depending on the structure’s load requirements. Because of the strength-to-weight they provide, steel decking minimizes construction and material handling costs. This makes it perfect to use for multi-level buildings, but they can also be used for homes.

Types of Steel Decks

Steel decking has two types according to their uses. The first one is the roof deck. Usually installed over beams and joists, the roof deck is the section of the roof where everything else is placed, because of this, it needs to be strong enough to hold weight. Steel roof deck allows easier installation of roofing materials, waterproofing, insulation, and lightweight concrete. It is attached to the beams or joints through screws and mechanical fasteners, or by welding. Roof decks are very durable. They keep noise and heat away with their insulation properties. They are also easy to install and cost-effective. As a roof decking, it can be used for canopies and mezzanines.

Another type of steel deck is a composite floor deck. It has embossments in its ribs that bond with concrete, making the floor durable without adding weight. A composite floor deck acts as a working platform in the construction of a multi-level building. It also adds stability to a structure’s frame. Floor decks allow for fast installation, even on the most complex layouts. Moreover, the additional stability it provides means a reduction in the use of other materials. It is ideal as mezzanine flooring.

Benefits of Using Steel Deck

Aside from those already mentioned above, steel decks provide the following advantages:

  1. Versatility. Steel decks come in various thicknesses, depths, and rib spacing, so they can meet any of your project’s requirements.
  2. All-weather construction. You don’t have to wait for good weather to install steel decks, so your projects will not be delayed.
  3. Higher strength-to-weight ratio. This leads to lower costs for delivery, construction, and labor.
  4. Attractive design. Steel decks look amazing, especially roof decks with quality coating. Maintaining their look is also easy.
Steel Decks Guide for Your Next Construction Project

Installing Steel Decks

Steel decks are placed and adjusted to their final position before being permanently attached to the structure. It is important to ensure proper alignment. There are different ways to attach the decks to the structure — through metal screws, welding, and pneumatic or powder actuated pins. Steel decks should be fastened to the structure properly to avoid any problems later on. If you have someone else installing the decks for you, then this should not be a concern. This can be quite technical so it is best to leave them to the professionals.

Now that you know the basics of steel decks, are you ready to get your own? You don’t have to look far because Union Galvasteel Corporation has the right steel decks for you. We have Duraweb, which is ideal for multi-storey commercial buildings and houses, elevated highways, bridges, overpass, and high-rise condominiums. Its rib design provides superior tensile reinforcement and provides better concrete interlock.

Duradeck is designed to act as positive reinforcement and bonds with concrete as a composite flooring material. This allows for consuming less concrete and shoring support, thus leading to saving on construction material. Also, its underside design is aesthetically pleasing. You have the option to retain the underside as is, which saves on costly materials that can escalate your interior design budget. We also have V-Deck, which offers the same benefits as our decking profiles but comes in another shape and size.

You can ask us about the steel deck that will best suit your project depending on your requirements. We also offer other professional roofing services such as on-site rollforming, roofing estimates, and installation for your construction projects. Contact us to know the steel deck price in Philippines and other queries.

Union Galvasteel Corporation is the market leader in the manufacturing and distribution of pre-painted and other galvanized roofing and galvanized steel building products in the Philippines. If you need any of our products, we are easy to find, as we have the largest and most diversified distribution network in the industry. We have warehouses and sales offices in strategic locations throughout the country. Get in touch with us via our website or call these numbers for assistance: (02) 8520-8822-23; 8520-8831; (049) 545-0084 to 86 or 09175033965 (Globe) and 09190032303 (Smart).

Leave a Reply