Skip to content
  • Home
  • About Us
  • Products
  • Services
  • Projects
  • Contact Us
  • Home
  • About Us
  • Products
  • Services
  • Projects
  • Contact Us

UGC LAUDS CLEARER GUIDELINES FOR DAO 20-10

Following concerns raised by various industry stakeholders over the provisions and implementation of DAO 20-10, the Bureau of Philippine Standards (BPS) has issued Memorandum Circular No. 21-13, series of 2021, to clarify and make more explicit the guidelines for the technical regulation of hot-dip metallic-coated and pre-painted galvanized iron steel coils and sheets for roofing and general applications.

DTI Sec. Ramon Lopez said that MC 21-13 is the result of the department’s review of the DAO 20-10 guidelines “to balance the interests of the stakeholders without prejudice to the safety of consumers.”

The department clarified that DAO 20-10 includes all steel coils and sheets intended for roofing and general applications with a Total Coat Thickness (TCT) of up to 0.89mm, inclusive of base metal and metallic coating.

Under the amended guidelines, the manufacture or importation of steel coils and sheets below 0.2mm is prohibited, except if they are distributed in a form that will not be used for roofing.

DTI maintains that a minimum TCT of 0.4mm is mandatory for steel coils and sheets for roofing purposes.  These are required to be labelled “FOR ROOFING USE”.

Steel products of lesser thickness (0.3mm and below) shall be labelled “NOT FOR ROOFING USE” or “FOR GENERAL APPLICATION” and if distributed in the local market in the form of plain or corrugated sheets or other similar forms shall be full-hard grade.

Supplemental provisions in the Philippine Standard (PS) applications are also contained in MC 21-13. 

Under this directive, PS marks are required for all local and imported steel coils and sheets for roofing purposes with 0.2mm to 0.8mm thickness.

However, those intended for non-roofing use are exempted from PS Certification, but will still be subject to inspection and verification by the Department.

For its part, Union Galvasteel Corporation welcomes the continuing clarification by DTI on the provisions of DAO 20-10.

“We fully support the amended guidelines for DAO 20-21 as they are intended to protect the consuming public from unscrupulous practices and sub-standard products”, declares PHINMA Construction Materials Group (CMG) President Ed Sahagun.

All UNION GALVASTEEL products bear the TATAK UNION mark, representing QUALITY, INTEGRITY and VALUE.  “It is your assurance of product excellence in every UNION product”, Mr. Sahagun added.

You might also like

Roof Repair vs Roof Replacement: Factors to Consider for Your Next Roof Project

August 6, 2021

Your home’s roof is the part that is most exposed to the elements. However, the extreme weather conditions here in the Philippines could ​​damage your

Read More »

How Long-Span Roofs Help Prevent Moisture Buildup in Agricultural Buildings

October 18, 2024

The Philippines is an agricultural country with varying weather conditions. Farmers require infrastructures that can withstand heavy rains to extreme humidity. If your roofing material

Read More »

What Is a Roof Flashing?

November 25, 2024

For many of us in the Philippines, we may need to get our roofs repaired after strong typhoons or other extreme weather. If you are

Read More »
« Previous Page1 Page2 Page3 Page4 Page5 Next »

Our Affiliates

Union Galvasteel leverages on the expertise and scale of PHINMA’s Construction Materials Group, which includes Union Philcement, Union Solar, and Union Insulated Panels to fulfill our vision of delivering high-quality foundation-to-roof solutions to every Filipino across the nation. This is in lieu of our commitment in supporting nation-building and driving economic progress.

Union Galvasteel Corporation
Main Plant and Head Office
Bacnotan Drive, Brgy. Real, Calamba City, Laguna

Facebook Instagram Tiktok

Union Galvasteel

About Us
Products
Services
Projects
News

Careers
Facilities
Contact Us
Cookie Policy
Privacy Policy